Re: Helix Angle
Posted by
david_margrave
on 2004-03-10 10:58:20 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Terry Owens" <terry@o...> wrote:
automotive heater hose with clamps to make stepper couplings. may or
may not work for you.
> Hi,aluminium bar
>
> Thank you for the replies but they don't help as everyone came up with a
> different answer.
>
> What I'm trying to do is cut a 3 start helical slot around an
> to make couplings for stepper motors.i made life easy for myself and just used a short section of
automotive heater hose with clamps to make stepper couplings. may or
may not work for you.
Discussion Thread
Terry Owens
2004-03-09 15:09:11 UTC
Helix Angle
rawen2
2004-03-09 17:14:53 UTC
Re: Helix Angle
rawen2
2004-03-09 17:22:03 UTC
Re: Helix Angle
rawen2
2004-03-09 18:07:51 UTC
Re: Helix Angle
Kevin Martin
2004-03-09 18:58:06 UTC
RE: [CAD_CAM_EDM_DRO] Helix Angle
Raymond Heckert
2004-03-09 19:13:23 UTC
Re: [CAD_CAM_EDM_DRO] Helix Angle
Terry Owens
2004-03-10 09:26:02 UTC
Re: [CAD_CAM_EDM_DRO] Helix Angle
Terry Owens
2004-03-10 09:48:48 UTC
Re: [CAD_CAM_EDM_DRO] Helix Angle
david_margrave
2004-03-10 10:58:20 UTC
Re: Helix Angle
John Johnson
2004-03-10 12:50:53 UTC
Re: [CAD_CAM_EDM_DRO] Helix Angle
Marcus
2004-03-10 17:57:44 UTC
Re: [CAD_CAM_EDM_DRO] Helix Angle
Raymond Heckert
2004-03-10 20:09:35 UTC
Re: [CAD_CAM_EDM_DRO] Helix Angle
Terry Owens
2004-03-11 07:36:26 UTC
Re: [CAD_CAM_EDM_DRO] Helix Angle
ballendo
2004-03-11 09:09:45 UTC
motor couplers was Re: Helix Angle
Raymond Heckert
2004-03-11 20:30:43 UTC
Re: [CAD_CAM_EDM_DRO] Helix Angle
Raymond Heckert
2004-03-11 20:30:44 UTC
Re: [CAD_CAM_EDM_DRO] Helix Angle