CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Parallel ports

Posted by sdfine@d...
on 2004-03-19 10:57:35 UTC
I use the VIA Mini-ITX boards.
http://www.viatech.com/en/VInternet/mini_itx.jsp

They are extremely small which allows me to easily put it in a small case
with my stepper controllers. They have 1-serial, 1-parallel, and 2 USB
ports.

Steve

-----Original Message-----
From: Ron [mailto:veeguy@...]
Sent: Friday, March 19, 2004 12:00 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Parallel ports


>Walk into any computer store and try to buy a motherboard or system
>that has a pport... Good luck.

Actually most current motherboards still have parallel ports on them. I
build these machines for industrial control, so I need serial and
parallel ports.

I just built several machines at work, and considered Abit, Intel,
Gigabyte, and several other brands. All had PPorts.

I settled on the Intel 865 PERL motherboards, which cost about $140.- (one
of the higher priced ones)

Other boards started below $80.-

veeguy





Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........ bill List
Mom List Owner


Yahoo! Groups Links

Discussion Thread

Ron 2004-03-19 10:09:34 UTC Parallel ports sdfine@d... 2004-03-19 10:57:35 UTC RE: [CAD_CAM_EDM_DRO] Parallel ports Roy J. Tellason 2004-03-19 11:05:46 UTC Re: [CAD_CAM_EDM_DRO] Parallel ports Mariss Freimanis 2004-03-19 11:36:07 UTC Re: Parallel ports