Re: rookie needs help
Posted by
Jens Swales
on 2004-03-20 14:08:52 UTC
hi
how did you arrange the temporary connection?
do you use an external pendant or similar for the z-jog?
jens
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "djamer88" <dennisf38@a...>
wrote:
how did you arrange the temporary connection?
do you use an external pendant or similar for the z-jog?
jens
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "djamer88" <dennisf38@a...>
wrote:
> First thanks to all for any help, I have the Flash cut system anduse
> Have it installed on the PC side and it's working, I am trying to
> it on an Orac Denford lathe using it's original PKS Digiplan drivesthey
> and MAE stepper motor's the drives do not need an enable line as
> are hot with power turned on both drives are holding position, Idid
> have the Z stepper jog from the jog control on the PC screen but Isystem
> had the line in a temporary connection and when I made it a more
> permanent connection and hooked up the X dive and retried the
> it would not jog again I have double checked the connection drives
> are hot grounds are good but no Jog control any help is appreciated.
>
> Brg's
> Dennis
Discussion Thread
djamer88
2004-03-20 13:07:02 UTC
rookie needs help
Jens Swales
2004-03-20 14:08:52 UTC
Re: rookie needs help
djamer88
2004-03-20 15:07:22 UTC
Re: rookie needs help
Jens Swales
2004-03-21 11:29:32 UTC
Re: rookie needs help