Re: PPorts and ISA
Posted by
rotarysmp
on 2004-03-22 00:30:58 UTC
The Servo To Go website http://www.servotogo.com/ has a link on the
left, to sources of ISA equipped MoBo's.
The Baber.com link seems to give the best choice, with Slot 1, socket
7, Socket A and current socket 478 models available. Tiger direct
also lists Socket 370 models.
While it is true that the ISA slot is no longer mainstream, it is
still available at resonable prices, just not from your local
computor store (but then again, none of the other motion control
hardware we need is either).
Regards,
Mark
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Roy J. Tellason"
<rtellason@b...> wrote:
left, to sources of ISA equipped MoBo's.
The Baber.com link seems to give the best choice, with Slot 1, socket
7, Socket A and current socket 478 models available. Tiger direct
also lists Socket 370 models.
While it is true that the ISA slot is no longer mainstream, it is
still available at resonable prices, just not from your local
computor store (but then again, none of the other motion control
hardware we need is either).
Regards,
Mark
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Roy J. Tellason"
<rtellason@b...> wrote:
> On Saturday 20 March 2004 12:20 am, Ron wrote:zip,
>
> > The ISA port post is *right* on target. I have searched high and
> > low for ANY motherboards with ISA slots. There are none, zero,
> > nada.offer more
>
> What really gets me about that is that the board makers typically
> than one model, some have the ISA, some don't. And it's theretailers
> focusing their buying decisions on the ones that don't that makethe ones
> that do so scarce...
>
> > I had to replace 3 Allen Bradley Data Hiway plus and DH485 1784KTX
> > cards with the PCI equivalent (1785PKTX) in able to upgrade my old
> > PC. At $1275.- each, I would have paid QUITE a premium for a new
> > Motherboard with ISA slots!
>
> Ouch. What kind of cards are these?
Discussion Thread
Ron
2004-03-19 22:18:54 UTC
PPorts and ISA
sdfine@d...
2004-03-20 09:12:46 UTC
RE: [CAD_CAM_EDM_DRO] PPorts and ISA
Roy J. Tellason
2004-03-20 09:26:09 UTC
Re: [CAD_CAM_EDM_DRO] PPorts and ISA
rotarysmp
2004-03-22 00:30:58 UTC
Re: PPorts and ISA