Re: [CAD_CAM_EDM_DRO] VFD problems with my Bridgeport CNC..
Posted by
Raymond Heckert
on 2004-03-28 18:29:51 UTC
Don't try to run the whole machine from the VFD, unless you can keep it's
output at the B'Port's 'Rated' voltage. If your BOSS 3 has a variable speed
spindle, use it, else use the VFD on the spindle only, and get a 'Rotary'
for the rest of the machine.
RayHex
----------
on average of 13Hz until I turned the High/Low range knob and got an error
on the VFD.
output at the B'Port's 'Rated' voltage. If your BOSS 3 has a variable speed
spindle, use it, else use the VFD on the spindle only, and get a 'Rotary'
for the rest of the machine.
RayHex
----------
> From: Mike Mueller <mueller914@...>it is not wise to try and power the entire machine with it???
>
> I have the feeling the FVD is "only" for the main spindle motor and that
>(I could hear only the fans run in the Boss 3 case) and the Hz LED should
> Am I correct here? I hooked up the VFD, turned the power on the machine
on average of 13Hz until I turned the High/Low range knob and got an error
on the VFD.
>application?
> If it helps any, the VFD is a Hitachi L100-015nfu.
>
> Would a rotary phase converter be what i really need/want for this
>
> thanks......
Discussion Thread
Mike Mueller
2004-03-27 20:48:00 UTC
VFD problems with my Bridgeport CNC..
Jon Elson
2004-03-27 22:53:33 UTC
Re: [CAD_CAM_EDM_DRO] VFD problems with my Bridgeport CNC..
ibewgypsie
2004-03-28 04:39:23 UTC
Re: VFD problems with my Bridgeport CNC..
Peter Reilley
2004-03-28 11:00:00 UTC
Re: [CAD_CAM_EDM_DRO] VFD problems with my Bridgeport CNC..
vavaroutsos
2004-03-28 14:50:15 UTC
Re: VFD problems with my Bridgeport CNC..
Raymond Heckert
2004-03-28 18:29:51 UTC
Re: [CAD_CAM_EDM_DRO] VFD problems with my Bridgeport CNC..
ibewgypsie
2004-03-28 21:15:26 UTC
Re: VFD problems with my Bridgeport CNC../rotary
Jon Elson
2004-03-28 23:18:41 UTC
Re: [CAD_CAM_EDM_DRO] VFD problems with my Bridgeport CNC..
vavaroutsos
2004-03-30 09:36:58 UTC
Re: VFD problems with my Bridgeport CNC../rotary