Re: [CAD_CAM_EDM_DRO] PCB Milling - Using Eagle, how do I get Gcode to drill pad holes?

Luis,

You have to run the CAM processor feature of the Eagle software.
1. while in the board editor, use FILE, RUN drillcfg.ulp
2. select inch or millimeters
3. dialog will appear what drills you will need. you may edit.
4.press OK to save the drill rack Filename.drl extension base name the same
as your board works here.
5.from the board editor use, File, CAM Processor command
6. open aawstandard.cam file (on the CD-Rom) possibly available on the web.
at Eagle.
7. make sure the layers are on that you want to process.
8.Select the Drill Tab (Job section+drill) (output device +Exellion) (Rack +
.drl) (File = .exc)
9 Push the Process Job button.
Wa-La all done. the g code should be there with the .drl extension

Regards, Mike Benoit

----- Original Message -----
From: "luisfreeman74" <Luis_Freeman@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Thursday, April 22, 2004 10:07 AM
Subject: [CAD_CAM_EDM_DRO] PCB Milling - Using Eagle, how do I get Gcode to
drill pad holes?


> Has anybody been able to generate Gcode out of Eagle to automatically
> drill the padholes? Is there a script to do this?
>
> So far, I have been able to generate out of Eagle the outline to mill
> the PCB based on the information on this web page.
>
> http://www.yty.net/cnc/
>
> Thanks....
>
> Luis Freeman
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>