500-1033 oz in stepper motor and power supplies

I recently got an oportunity to buy a distributor's remaining stock
of stepper motors. They are all new and were manufacured in the past
year. Some have hybrid magnets and others are standard. He is
changing his line of motors so I took advantage of it. The price was
right and knowing how tight a budget most DIY CNC are on I was able
to swing a deal that would allow me to sell all brand new 200 step
per rev stepper motors at unheard of low prices.
Most of the motors are dual shaft, 8 wires in the 500-1033 oz in
range and are ideal for
many cnc lathe, mill/drill, 3/1 machines and small knee mill
conversions. My prices are lower than any other comparable motors.
Check them out at www.seanet.com/~dmauch . See my "what's new" or
the product section for the various model numbers availble. THESE
MOTOR will SELL FAST so once they are gone that's it. I can email
data sheets for selected steppers.

I also acquired about 35 NEW linear unregulated power supplies also
at awesomely low prices. Many are idea for that bridgeport retrofit
with output voltages in the 40V to 80VDC range at 20A-40A. All of
them are listed on the above web site.

Please contact me offline if interested in any of the items on my web
site.
Last, I would like to thank all those that sent me best wishes
during my recent major surgery. I have mostly recovered but with
any major surgery it takes time to fully recover but looks like I
will be off light duty in about two weeks.

Dan Mauch
Camtronics Inc