Re: [CAD_CAM_EDM_DRO] My mill project
Posted by
Alan Marconett KM6VV
on 2004-05-02 12:41:50 UTC
Hi Gregory,
Just a thought, why not put the angled support for the vertical on the
BACKSIDE, this way you won't loose as much of the throat (Y).
Alan KM6VV
Gregory Kamysz wrote:
Just a thought, why not put the angled support for the vertical on the
BACKSIDE, this way you won't loose as much of the throat (Y).
Alan KM6VV
Gregory Kamysz wrote:
>
> I've been a bit slow on my project. This is what I've come up with for
> my machine. The wooden mock up before I start cutting metal for my Z
> support is pictured here.
>
> http://edfinfo.com/temp/mill.JPG
>
> Any comments? I have all the electronic components and the axis' have
> been tested. I need to tune them but it all works. I have to make the
> support for the router, that will be tomorrow.
>
> Gregory Kamysz
> Crystal Lake, IL
> USA
>
Discussion Thread
Terry Owens
2004-04-30 13:45:39 UTC
Resolution
bull2002winkle
2004-04-30 14:22:21 UTC
Re: Resolution
Nick Ibbitson
2004-05-01 09:53:32 UTC
Re: [CAD_CAM_EDM_DRO] Resolution
Terry Owens
2004-05-01 18:03:41 UTC
Re: [CAD_CAM_EDM_DRO] Resolution
Gregory Kamysz
2004-05-01 19:20:06 UTC
My mill project
Scott A. Stephens
2004-05-02 07:18:38 UTC
Re: [CAD_CAM_EDM_DRO] My mill project
Alan Marconett KM6VV
2004-05-02 12:41:50 UTC
Re: [CAD_CAM_EDM_DRO] My mill project
Gregory Kamysz
2004-05-02 14:27:41 UTC
Re: [CAD_CAM_EDM_DRO] My mill project