CAD CAM EDM DRO - Yahoo Group Archive

Re: Where to find bellows?

Posted by stickymike23
on 2004-07-26 12:44:39 UTC
You could try a motorcycle shop that sells offroad accessories and
look at the gaitors used to protect the fork tubes from mud etc they
will probably be about 2" diameter . Heck you might even get a choice
of colours. the lenghts may be a bit short so you may need to join a
couple with a bit of tube

--- In CAD_CAM_EDM_DRO@yahoogroups.com, "washcomp" <jeff@w...> wrote:
> I am looking for a pair of round screw cover bellows:
>
> 1.5" to 1.75" ID, 2.325" to 2.5" OD, 30" to 36" long
> Liquid tight (for lubricating oil)
> Similar to Gortite Gortiflex neoprene coted nylon
>
>
> I can find these at McMaster Carr for about $93 each, MSC is
slightly
> less, but only up to 24". Gortite direct only stocks to 24" (6
week
> lead time on non-stock legnths)
>
> Two hundred bucks seems a lot to spend on two pieces of glorified
> vacuum cleaner hose. Any alternate (cheaper) sources (none on E-
Bay)
> would be appreciated.
>
> Jeff

Discussion Thread

washcomp 2004-07-26 10:58:44 UTC Where to find bellows? stickymike23 2004-07-26 12:44:39 UTC Re: Where to find bellows? caudlet 2004-07-26 14:23:30 UTC Re: Where to find bellows? JanRwl@A... 2004-07-26 14:34:27 UTC Re: [CAD_CAM_EDM_DRO] Where to find bellows? washcomp 2004-07-26 16:42:01 UTC Re: Where to find bellows? washcomp 2004-07-26 16:44:44 UTC Re: Where to find bellows? washcomp 2004-07-26 16:58:01 UTC Re: Where to find bellows?