No movement

I am still trying to get my machine to move. I can get EMC to home by
tripping the home switch's by hand, The letters turn green and start
counting when I push Jog, but no movement of the motors. The I/O show
script shows the pins changing colors and reacting to the jog commands.
On the geckos I get 1.56 volts between the +5 term. and the step term,
and 4.65 volts between the +5 term. and the dir term. The power terms
show 46 volts and the motors are locked up. Is there something in the
ini that could cause this. The parallel cable from the puter to the
breakout board came off a working machine. Could it be a bad breakout
board?