RE: [CAD_CAM_EDM_DRO] Delta Tau PMAC card Used with EMC
Posted by
tomp_tag@i...
on 2004-09-10 09:59:57 UTC
Leslie:
there >was< a wrapper for EMC to talk to the PMAC.
very old, very early in the NIST dev.
The EMC was merely a cpmm program, sending litle ascii cmds to the pmac.
The pmac's ladder broke the gcode into the internal motion language
(ie: G00 X1.000 became something elxe via a PLC based parser).
you can get info from delta tau themselves.
If it's an ISA card, it's kinda old, but atleast 4 axis capable.
tomp
--------------------------------------------------------------------
mail2web - Check your email from the web at
http://mail2web.com/ .
there >was< a wrapper for EMC to talk to the PMAC.
very old, very early in the NIST dev.
The EMC was merely a cpmm program, sending litle ascii cmds to the pmac.
The pmac's ladder broke the gcode into the internal motion language
(ie: G00 X1.000 became something elxe via a PLC based parser).
you can get info from delta tau themselves.
If it's an ISA card, it's kinda old, but atleast 4 axis capable.
tomp
--------------------------------------------------------------------
mail2web - Check your email from the web at
http://mail2web.com/ .
Discussion Thread
bdrmachine
2004-09-04 07:05:44 UTC
Delta Tau PMAC card Used with EMC
Leslie Watts
2004-09-04 09:45:58 UTC
RE: [CAD_CAM_EDM_DRO] Delta Tau PMAC card Used with EMC
Paul
2004-09-04 10:13:31 UTC
Re: [CAD_CAM_EDM_DRO] Delta Tau PMAC card Used with EMC
tomp_tag@i...
2004-09-10 09:59:57 UTC
RE: [CAD_CAM_EDM_DRO] Delta Tau PMAC card Used with EMC