CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] electro-craft servos

Posted by John Craddock
on 2004-10-14 23:58:46 UTC
Kt 14.9 +/- 10% oz in / amp
Ke 10.5 - 11.5 Volt/1000rpm
Terminal resistance at 4 amps = 1.4 - 1.8 ohms
Electrical time constant 3 msec
Mechanical time constant 8 msec
Maximum peak torque 420 oz in
Maximum continuous current 3.7 amps
No-load current at 24 volt = 0.33 amps
Motor inertia = 0.008 oz in
Maximum continuous speed = 4000 rpm
Friction torque = 3 oz in
HTH
Regards
John C
-----Original Message-----
From: afogassa [mailto:afogassa@...]
Sent: 15 October 2004 14:15
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] electro-craft servos




Does anyone have the specs for the electro-craft servo motor model
E543 that's being sold at electronic goldmine ?







Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links

Discussion Thread

afogassa 2004-10-14 21:14:46 UTC electro-craft servos John Craddock 2004-10-14 23:58:46 UTC RE: [CAD_CAM_EDM_DRO] electro-craft servos afogassa 2004-10-15 07:21:35 UTC Re: electro-craft servos dpresto3 2004-10-18 21:36:32 UTC Re: electro-craft servos Jon Elson 2004-10-18 23:31:43 UTC Re: [CAD_CAM_EDM_DRO] Re: electro-craft servos John Craddock 2004-10-19 05:06:13 UTC RE: [CAD_CAM_EDM_DRO] Re: electro-craft servos