RE: [CAD_CAM_EDM_DRO] Re: electro-craft servos
Posted by
John Craddock
on 2004-10-19 05:06:13 UTC
Thank you for filling in the blanks Jon
Regards
John C
-----Original Message-----
From: Jon Elson [mailto:elson@...]
Sent: 19 October 2004 16:32
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] Re: electro-craft servos
dpresto3 wrote:
Now, if you want to deliver peak torque at that speed, you
need to add the IR drop, which is 420/Kt = 28 A * 1.6 Ohms=
44 V. So, you need 44 + 44 = 88 V to deliver peak torque
at 4000 RPM. If you don't need full torque or full speed,
you can do with less. If you will be using Gecko drives,
then your current limit is 20 A anyway. That would be
20 * 1.6 = 32 + 44 = 76 V, which sounds good for a Gecko.
Jon
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Yahoo! Groups Links
Regards
John C
-----Original Message-----
From: Jon Elson [mailto:elson@...]
Sent: 19 October 2004 16:32
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] Re: electro-craft servos
dpresto3 wrote:
>Max RPM is 4000 * Ke of about 11, gives 44 V for no load.
>Hi John,
>I have some E543 motors, are you able to tell me what the normal
>voltage rating is for these motors (I have been told they may be 60
>volts but have not been able to confirm that) and what the peak
>amperage is (amperage under maximum acceleration).
>Regards
>David
><John.Craddock@x> wrote:
>
>
>>Kt 14.9 +/- 10% oz in / amp
>>Ke 10.5 - 11.5 Volt/1000rpm
>>Terminal resistance at 4 amps = 1.4 - 1.8 ohms
>>Electrical time constant 3 msec
>>Mechanical time constant 8 msec
>>Maximum peak torque 420 oz in
>>Maximum continuous current 3.7 amps
>>No-load current at 24 volt = 0.33 amps
>>Motor inertia = 0.008 oz in
>>Maximum continuous speed = 4000 rpm
>>Friction torque = 3 oz in
>>
>>
Now, if you want to deliver peak torque at that speed, you
need to add the IR drop, which is 420/Kt = 28 A * 1.6 Ohms=
44 V. So, you need 44 + 44 = 88 V to deliver peak torque
at 4000 RPM. If you don't need full torque or full speed,
you can do with less. If you will be using Gecko drives,
then your current limit is 20 A anyway. That would be
20 * 1.6 = 32 + 44 = 76 V, which sounds good for a Gecko.
Jon
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Yahoo! Groups Links
Discussion Thread
afogassa
2004-10-14 21:14:46 UTC
electro-craft servos
John Craddock
2004-10-14 23:58:46 UTC
RE: [CAD_CAM_EDM_DRO] electro-craft servos
afogassa
2004-10-15 07:21:35 UTC
Re: electro-craft servos
dpresto3
2004-10-18 21:36:32 UTC
Re: electro-craft servos
Jon Elson
2004-10-18 23:31:43 UTC
Re: [CAD_CAM_EDM_DRO] Re: electro-craft servos
John Craddock
2004-10-19 05:06:13 UTC
RE: [CAD_CAM_EDM_DRO] Re: electro-craft servos