Re: electro-craft servos

Thank's John :)


--- In CAD_CAM_EDM_DRO@yahoogroups.com, "John Craddock"
<John.Craddock@x> wrote:

> Kt 14.9 +/- 10% oz in / amp
> Ke 10.5 - 11.5 Volt/1000rpm
> Terminal resistance at 4 amps = 1.4 - 1.8 ohms
> Electrical time constant 3 msec
> Mechanical time constant 8 msec
> Maximum peak torque 420 oz in
> Maximum continuous current 3.7 amps
> No-load current at 24 volt = 0.33 amps
> Motor inertia = 0.008 oz in
> Maximum continuous speed = 4000 rpm
> Friction torque = 3 oz in
> HTH
> Regards
> John C
> -----Original Message-----
> From: afogassa [mailto:afogassa@y...]
> Sent: 15 October 2004 14:15
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: [CAD_CAM_EDM_DRO] electro-craft servos
>
>
>
>
> Does anyone have the specs for the electro-craft servo motor model
> E543 that's being sold at electronic goldmine ?
>
>
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@a...,

timg@k...

> Moderator: pentam@c... indigo_red@q... davemucha@j...

[Moderators]

> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:

aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach
it if you have trouble.

> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to

be a sister site to the CCED group, as many of the same members are
there, for OT subjects, that are not allowed on the CCED list.

>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING

THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........

> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links