Re: [CAD_CAM_EDM_DRO] How does one adjust Ballscrews on a Bridgeport

Jon Elson wrote:

>Stephen,
>
>One other thing: It may matter which way the bearings are facing!
>So, you might try turning one (or both) of the bearings around.
>If they are angular contact, it definitely will matter which way both of
>them
>are facing. If they are not shielded, you should be able to tell which
>way the races face for proper thrust capacity.
>
>Jon
>
>

Luckily, they were marked (and I prepared a clean area and put parts in
their original orientation while disassembling) :)

- Steve