CAD CAM EDM DRO - Yahoo Group Archive

Re: How does one adjust Ballscrews on a Bridgeport

Posted by bryan b
on 2004-10-30 19:28:48 UTC
Ron,

Seems like the the machine you mention has one thing in common with
Steve's and mine; the three have been apart and put back together
(incorrectly, I think).

I bet the proto trak you mention is also a Southwest Industries
product, like mine. I called them to get an idea about the machine and
the controls when I bought it, and an 'old timer' who was around in
the mid '80s answered some questions for me. The control was a 6502
processor el-primitivo, didn't even have a serial connection. Thats
when I decided to go with a Gecko 320 and DeskCNC setup.

SWI is on my to-call list as soon as I can get them on Monday, but I
bet I get a better answer here.

Bryan



--- In CAD_CAM_EDM_DRO@yahoogroups.com, R Rogers <rogersmach@y...> wrote:

>
> Yes if the screw is making a linear movement and the table
stationary there is a problem. The way mine is its just a cross block
consisting of two ballnuts and two ground ballscrews. All of the
backlash adjustment is taken up with shims behind the bearings on the
endplates. The b'port I ran with ballscrews manually was an old
machine that they had retrofitted with a Proto-trak control and then
removed it and put it on a new B'port. So, I quickly claimed the
manual with the new ballscrews thinking it would be better. I didnt
like it for manual machining at all. It never felt like i had real
good control of it through the handcranks. Spongy and if an endmill
grabbed the work it would actually push the table and feed the
ballscrew. The thing was downright dangerous. There was no backlash,
it was just spongy under load and not very responsive.
>
> Ron
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@a...,
timg@k...
> Moderator: pentam@c... indigo_red@q... davemucha@j... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach
it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be
a sister site to the CCED group, as many of the same members are
there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
>
> ---------------------------------
> Do you Yahoo!?
> Yahoo! Mail - Helps protect you from nasty viruses.
>
> [Non-text portions of this message have been removed]

Discussion Thread

Stephen Wille Padnos 2004-10-28 22:23:35 UTC How does one adjust Ballscrews on a Bridgeport Jon Elson 2004-10-29 08:44:50 UTC Re: [CAD_CAM_EDM_DRO] How does one adjust Ballscrews on a Bridgeport Jon Elson 2004-10-29 08:47:02 UTC Re: [CAD_CAM_EDM_DRO] How does one adjust Ballscrews on a Bridgeport Ed Fanta 2004-10-29 10:58:43 UTC Re: [CAD_CAM_EDM_DRO] How does one adjust Ballscrews on a Bridgeport R Rogers 2004-10-29 18:24:51 UTC Re: [CAD_CAM_EDM_DRO] How does one adjust Ballscrews on a Bridgeport Stephen Wille Padnos 2004-10-29 19:50:34 UTC Re: [CAD_CAM_EDM_DRO] How does one adjust Ballscrews on a Bridgeport Stephen Wille Padnos 2004-10-29 19:52:14 UTC Re: [CAD_CAM_EDM_DRO] How does one adjust Ballscrews on a Bridgeport Stephen Wille Padnos 2004-10-29 19:54:33 UTC Re: [CAD_CAM_EDM_DRO] How does one adjust Ballscrews on a Bridgeport Stephen Wille Padnos 2004-10-29 19:58:55 UTC Re: [CAD_CAM_EDM_DRO] How does one adjust Ballscrews on a Bridgeport Jon Elson 2004-10-29 21:06:23 UTC Re: [CAD_CAM_EDM_DRO] How does one adjust Ballscrews on a Bridgeport Jon Elson 2004-10-29 21:07:11 UTC Re: [CAD_CAM_EDM_DRO] How does one adjust Ballscrews on a Bridgeport R Rogers 2004-10-29 22:17:18 UTC Re: [CAD_CAM_EDM_DRO] How does one adjust Ballscrews on a Bridgeport R Rogers 2004-10-29 22:44:09 UTC Re: [CAD_CAM_EDM_DRO] How does one adjust Ballscrews on a Bridgeport Stephen Wille Padnos 2004-10-29 23:50:40 UTC Re: [CAD_CAM_EDM_DRO] How does one adjust Ballscrews on a Bridgeport Jon Elson 2004-10-30 14:22:03 UTC Re: [CAD_CAM_EDM_DRO] How does one adjust Ballscrews on a Bridgeport bryan b 2004-10-30 19:23:23 UTC Re: How does one adjust Ballscrews on a Bridgeport bryan b 2004-10-30 19:28:48 UTC Re: How does one adjust Ballscrews on a Bridgeport Jon Elson 2004-10-30 22:30:34 UTC Re: [CAD_CAM_EDM_DRO] Re: How does one adjust Ballscrews on a Bridgeport R Rogers 2004-10-31 06:32:22 UTC Re: [CAD_CAM_EDM_DRO] Re: How does one adjust Ballscrews on a Bridgeport Jon Elson 2004-10-31 10:39:23 UTC Re: [CAD_CAM_EDM_DRO] Re: How does one adjust Ballscrews on a Bridgeport R Rogers 2004-10-31 10:59:55 UTC Re: [CAD_CAM_EDM_DRO] How does one adjust Ballscrews on a Bridgeport Jon Elson 2004-10-31 11:17:02 UTC Re: [CAD_CAM_EDM_DRO] How does one adjust Ballscrews on a Bridgeport R Rogers 2004-10-31 12:43:36 UTC Re: [CAD_CAM_EDM_DRO] How does one adjust Ballscrews on a Bridgeport bryan b 2004-10-31 19:58:18 UTC Re: How does one adjust Ballscrews on a Bridgeport bryan b 2004-10-31 20:18:12 UTC Re: How does one adjust Ballscrews on a Bridgeport wthomas@g... 2004-10-31 23:38:56 UTC Re: [CAD_CAM_EDM_DRO] Re: How does one adjust Ballscrews on a Bridgeport turbulatordude 2004-11-01 08:21:56 UTC Encoder Repair Technician