RE: [CAD_CAM_EDM_DRO] Re: How to test stepping motors

Umm, maybe, but I would call that circuit a "driver". No?

Andy Wander
Verrex Corporation


-----Original Message-----
From: turbulatordude [mailto:davemucha@...]
Sent: Tuesday, November 23, 2004 1:16 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Re: How to test stepping motors



--- In CAD_CAM_EDM_DRO@yahoogroups.com, Alan Marconett <KM6VV@a...>
wrote:

> Hi ?,
>
> You need a driver for the stepper motor. Then run TurboCNC
>

I though one could make a simple circuit with some MOSFETS and then
connect them to the parallel port and TurboCNC can wave drive them.

Probably not the best, but for testing, it would be a simple way, no ?

Dave








Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links