running a CAM test on the mill
Posted by
wanliker@a...
on 2000-05-20 00:29:02 UTC
A friend was here today and we were discussing running tests on a newly
converted mill. Neither of us really liked putting a mill into the spindle
for the initial testing. Between the two of us we came up with the idea of
using a long eraser, and even better yet was his suggestion of a long, small
diameter spring to do the testing and nothing to get broken.
What do others use????
bill
converted mill. Neither of us really liked putting a mill into the spindle
for the initial testing. Between the two of us we came up with the idea of
using a long eraser, and even better yet was his suggestion of a long, small
diameter spring to do the testing and nothing to get broken.
What do others use????
bill
Discussion Thread
wanliker@a...
2000-05-20 00:29:02 UTC
running a CAM test on the mill
Dan Falck
2000-05-20 04:57:20 UTC
Re: [CAD_CAM_EDM_DRO] running a CAM test on the mill
Jeff Rossel
2000-05-20 08:10:03 UTC
Re: running a CAM test on the mill
ptengin@a...
2000-05-20 12:21:20 UTC
Re: [CAD_CAM_EDM_DRO] running a CAM test on the mill
Jon Elson
2000-05-20 21:38:42 UTC
Re: [CAD_CAM_EDM_DRO] running a CAM test on the mill