CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] running a CAM test on the mill

Posted by Dan Falck
on 2000-05-20 04:57:20 UTC
On Sat, 20 May 2000, you wrote:
> A friend was here today and we were discussing running tests on a newly
> converted mill. Neither of us really liked putting a mill into the spindle
> for the initial testing. Between the two of us we came up with the idea of
> using a long eraser, and even better yet was his suggestion of a long, small
> diameter spring to do the testing and nothing to get broken.
> What do others use????
> bill


Bill,
Mount a pen or pencil in the spindle and tape down some paper to the table.

Dan

Discussion Thread

wanliker@a... 2000-05-20 00:29:02 UTC running a CAM test on the mill Dan Falck 2000-05-20 04:57:20 UTC Re: [CAD_CAM_EDM_DRO] running a CAM test on the mill Jeff Rossel 2000-05-20 08:10:03 UTC Re: running a CAM test on the mill ptengin@a... 2000-05-20 12:21:20 UTC Re: [CAD_CAM_EDM_DRO] running a CAM test on the mill Jon Elson 2000-05-20 21:38:42 UTC Re: [CAD_CAM_EDM_DRO] running a CAM test on the mill