CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: EDM question; light bulbs and resistors

Posted by Zafar Salam
on 2004-12-17 01:11:29 UTC
Hi,

On my wire edm that's roughly an hour's job. I'll do it for free if you can
afford the shipping charges to Pakistan ;)

Zafar

----- Original Message -----
From: "turbulatordude" <dave_mucha@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, December 17, 2004 10:29 AM
Subject: [CAD_CAM_EDM_DRO] Re: EDM question; light bulbs and resistors



> on another note, I have a 1/2 tool steel part that I want to get
> weire edm's into 4 sections. pretty much just cut down the middle
> the long way, then thru the parts that are left.
>
> anybody wanna offer a Christmans present ?
>
> The material is TAUTUNG, a very hard cutting bit for my lathe. I
> have a part that is 6" long by 1/2 thick by 1 inch and would like to
> have 4 parts, roughtly 3 x 1/2 x 1/2
>
> Dave

Discussion Thread

Marc de Piolenc 2004-12-16 21:13:05 UTC EDM question; light bulbs and resistors turbulatordude 2004-12-16 21:29:09 UTC Re: EDM question; light bulbs and resistors TomP 2004-12-16 22:24:47 UTC Re: [CAD_CAM_EDM_DRO] EDM question; light bulbs and resistors turbulatordude 2004-12-16 23:44:16 UTC Re: EDM question; garden of EDM Zafar Salam 2004-12-17 01:11:29 UTC Re: [CAD_CAM_EDM_DRO] Re: EDM question; light bulbs and resistors turbulatordude 2004-12-17 09:42:45 UTC Re: EDM question; light bulbs and resistors - free EDM work ?