Re: EDM question; light bulbs and resistors - free EDM work ?

> on another note, I have a 1/2 tool steel part that I want to get
> weire edm's into 4 sections. pretty much just cut down the middle
> the long way, then thru the parts that are left.
>
> anybody wanna offer a Christmans present ?
>
> The material is TAUTUNG, a very hard cutting bit for my lathe. I
> have a part that is 6" long by 1/2 thick by 1 inch and would like to
> have 4 parts, roughtly 3 x 1/2 x 1/2
>
> Dave

--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Zafar Salam" <zafar@z...>
wrote:

> Hi,
>
> On my wire edm that's roughly an hour's job. I'll do it for free if

you can

> afford the shipping charges to Pakistan ;)
>
> Zafar

Hi Zafar,

It looks like it is less than 1 pound and would ship from here to
you for about $15.00 and take a few weeks to arrive.

Of course I would also pay to have it returned and buy you lunch.

Unless somebody in the States is offering, I would find it fun to
send it to you.

Thank you for the offer.

I'll take some photos and make a sketch to make sure it is simple
enough to do.

Dave