CAD CAM EDM DRO - Yahoo Group Archive

Re: etching/engraving PCB via a small CNC

on 2004-12-26 16:29:35 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "robot_csc364"
<robot_csc364@y...> wrote:
>
>
> I found a XY table on ebay http://cgi.ebay.com/ws/eBayISAPI.dll?
> ViewItem&category=25297&item=3843404692&rd=1&ssPageName=WD1V
>
> if I use this with a electronics kit from say hobbyCNC.. that would
> be pretty close to a complete setup? All I would have to add would
> be a Z travel.
>
> Let me know what yall think
>
> Nick

Common table.

Google Rick-o-matic He used that as the base of his small machine.

It is also available from Enco and Grizzley and most all tool
suppliers.

Dave

Discussion Thread

robot_csc364 2004-12-26 14:31:28 UTC etching/engraving PCB via a small CNC robot_csc364 2004-12-26 16:22:12 UTC Re: etching/engraving PCB via a small CNC turbulatordude 2004-12-26 16:29:35 UTC Re: etching/engraving PCB via a small CNC JanRwl@A... 2004-12-26 20:20:54 UTC Re: [CAD_CAM_EDM_DRO] etching/engraving PCB via a small CNC John Labutski 2004-12-27 16:10:36 UTC Re: etching/engraving PCB via a small CNC