CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Converting HF 12x36 or Grizzly G4003 to CNC

Posted by Kim Lux
on 2004-12-27 13:58:21 UTC
I did an Enco 13x40 using servos, Geckos, zero backlash ballscrews and
Turbocnc.


On Mon, 2004-12-27 at 19:15 +0000, Joel wrote:
>
> Has anyone converted a HF or Grizzly 12x36 lathe over to CNC ?
>
> I just purchased a HF 12x36 and I am starting the CNC conversion.
> Before I begin the process, I was hoping to get some insight on how
> someone else mounted the motors and such. What is the best place to
> connect to .... Photos or links
>
> Any help would be great.
>
> Thanks,
> Joel
>
> http://www.jhchoppers.com/cnc/
>
>
>
>
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
> Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
--
Kim Lux, Diesel Research Inc.

Discussion Thread

Joel 2004-12-27 11:15:40 UTC Converting HF 12x36 or Grizzly G4003 to CNC Kim Lux 2004-12-27 13:58:21 UTC Re: [CAD_CAM_EDM_DRO] Converting HF 12x36 or Grizzly G4003 to CNC shadi_salhab_78 2004-12-27 23:14:41 UTC Re: Converting HF 12x36 or Grizzly G4003 to CNC shawncd2001 2004-12-28 05:48:22 UTC Re: Converting HF 12x36 or Grizzly G4003 to CNC Shawncd 2004-12-28 18:40:35 UTC Re: [CAD_CAM_EDM_DRO] Converting HF 12x36 or Grizzly G4003 to CNC