Re: Converting HF 12x36 or Grizzly G4003 to CNC

Do you have any pictures Kim?
I would like to see them if you do.

Shawn

--- In CAD_CAM_EDM_DRO@yahoogroups.com, Kim Lux <lux@d...> wrote:
> I did an Enco 13x40 using servos, Geckos, zero backlash ballscrews
and
> Turbocnc.
>
>
> On Mon, 2004-12-27 at 19:15 +0000, Joel wrote:
> >
> > Has anyone converted a HF or Grizzly 12x36 lathe over to CNC ?
> >
> > I just purchased a HF 12x36 and I am starting the CNC conversion.
> > Before I begin the process, I was hoping to get some insight on
how
> > someone else mounted the motors and such. What is the best place
to
> > connect to .... Photos or links
> >
> > Any help would be great.
> >
> > Thanks,
> > Joel
> >
> > http://www.jhchoppers.com/cnc/
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
wanliker@a..., timg@k...
> > Moderator: pentam@c... indigo_red@q... davemucha@j...
[Moderators]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach
it if you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this
to be a sister site to the CCED group, as many of the same members
are there, for OT subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
EXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> --
> Kim Lux, Diesel Research Inc.