Re: [CAD_CAM_EDM_DRO] Campell Breakout Board Hook up

Just 110volts hot and neutral, from anywhere you can get it. It needs to be wired up beyond the start switch or it will be running all the time even when the machine is off. I'm not familiar with Dan's Control box. That breakout board also has a feature on jumper 4 that will not become active until the software is running. Nice feature that can be configured from preventing the user from starting the control circuit when PC control is absent.

Ron

Kade Riccketts <kader@...> wrote:


I am an electronics idiot. I need a little help clearing this up
before I hook up power. I have dan mauch control box, and I will
explain how the power comes in. Ok, coming from my power cable from
the wall to the control box, I have a ground, hot and neutral. The
hot goes to the front lighted switch top post, neutral goes to the
bottom post. The middle post on the front switch goes to the
transformers. I am assuming I run a wire from the middle post that
goes to the transformers to the hot connection on the campbell
breakout board, but where does the neutral come from, should I just
take a wire from the bottom post on the lighted switch and hook it up
to neutral? Thanks again.





Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links









---------------------------------
Do you Yahoo!?
The all-new My Yahoo! � What will yours do?

[Non-text portions of this message have been removed]