RE: [CAD_CAM_EDM_DRO] Re: Flex Coupling; No Backlash.

Lathehand:


I think what you were saying was that there was no(or minimal) backlash in
the coupling. I misunderstood(and probably wrote too quickly) I thought you
meant it got rid of backlash in the leadscrew.

Obviously, I;m workin; too hard.

Andy

Andy Wander
Verrex Corporation


-----Original Message-----
From: lathehand_2 [mailto:lathehand_2@...]
Sent: Wednesday, January 26, 2005 9:35 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Re: Flex Coupling; No Backlash.



Hello, OK, you MAYBE; right... but considering the use of couplings,
I BOUGHT, with the disk inserts, and the all so common plastic,
nylon, and other polycarbonated configuration items to be found; With
trial and error, I have to differ, and accroding to my setup, and
application, I find it, at least, a TOTAL Improvement for my Sake,
OVER, what has Been Installed, and Time Involved, in getting a
QUALITY Finish, and Repeatability. Your Right, Without BackLash, 'It
would'nt Move'.Then Again, Let's see how Long, it will Last. To Be
Continued:

--- In CAD_CAM_EDM_DRO@yahoogroups.com, Andy Wander <awander@v...>
wrote:

> How does it eliminate backlash? I would think, if anything, it would
> increase it(even if only ever so slightly)