Re: [CAD_CAM_EDM_DRO] OT Stepper motor for control pumping
Posted by
bobmcknight@c...
on 2005-02-22 17:19:13 UTC
Hook the cylinder rod to a length of chain, run the chain over
a sprocket and the sprocket to a stepping motor. If you have to
push, put the cylinder rod and chain in a tube with a slot in the
side of the tube for the sprocket to stick out.
bob mcknight
a sprocket and the sprocket to a stepping motor. If you have to
push, put the cylinder rod and chain in a tube with a slot in the
side of the tube for the sprocket to stick out.
bob mcknight
On 21 Feb 2005 at 23:07, callcbmf wrote:
I looking for away to hook a stepper motor to a Air or hyd cylinder
and move the piston to calibrate the discharge. What I'm doing is
filling jars with different oz of grease that I make. I need to
dispense 1 oz at a time or 1/4 at a time. I would like to make this a
stand alone system not using a pc this has to be done cheap. As the
grease sell then I can afford bigger equipment. But all I have to do
is make the stepper turn incremental amount. the cylinder will push
the product. But I have to able to change the amount it will turn to
change the fill volume. And need to activate a lift cylinder to aid
in the filling.
Thanks
Hope in the realm of the group
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
wanliker@..., timg@...
Moderator: pentam@... indigo_red@...
davemucha@... [Moderators]
URL to this group:
http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach
it if you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be
a sister site to the CCED group, as many of the same members are
there, for OT subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC
DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT
ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Yahoo! Groups Links
Discussion Thread
callcbmf
2005-02-21 15:07:16 UTC
OT Stepper motor for control pumping
R Rogers
2005-02-21 15:24:26 UTC
Re: [CAD_CAM_EDM_DRO] OT Stepper motor for control pumping
Alan Marconett
2005-02-21 15:39:55 UTC
Re: [CAD_CAM_EDM_DRO] OT Stepper motor for control pumping
alex
2005-02-21 16:09:19 UTC
Re: [CAD_CAM_EDM_DRO] OT Stepper motor for control pumping
turbulatordude
2005-02-21 18:47:00 UTC
Re: OT Stepper motor for control pumping
bobmcknight@c...
2005-02-22 11:10:58 UTC
Re: [CAD_CAM_EDM_DRO] OT Stepper motor for control pumping
Graham Stabler
2005-02-22 11:21:04 UTC
Re: OT Stepper motor for control pumping
bobmcknight@c...
2005-02-22 17:19:13 UTC
Re: [CAD_CAM_EDM_DRO] OT Stepper motor for control pumping