Re: [CAD_CAM_EDM_DRO] Re: Suitable Steppers

Thanks for this.

Not sure about the price yet, we shall see. Can you answer the question
about the Gecko drive? The supply voltage for the Gecko is 24 to 80V and the
data sheet suggests the supply should be 4 to 25 times the motors rated
voltage. If the rated voltage is 170V then they won't do but this sounds
very high to me. Have I completely mis-understood this?

Regarding servos I am just not sure where to look for these.

Thanks

Ian

----- Original Message -----
From: "Polaraligned" <polaraligned@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Saturday, April 30, 2005 1:22 PM
Subject: [CAD_CAM_EDM_DRO] Re: Suitable Steppers


> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "xj5373" <ian.c.haynes@b...>
> wrote:
> > HI,
> > I have come across some steppers Model N41HLFJ-LNK-NS-00 (Nema 42Size(
> > I have found info here
> > http://www.pacsci.com/products/step_motors/powerpacproducts.html but I
> > am struggling a bit with supply voltage, the vendor states 170V. Any
> > feel if this is right, would a Gecko drive run them and would they be
> > big enough for X and Y on my Bridgeport?
> >
> > Thanks
> >
> > Ian
>
> Nice motors, but big bucks I bet. Try here:
> http://www.clickautomation.com/products/index.php?func=list&cid=159
> The 1282 oz-in motors should be able to drive a bridgeport.
> Have you considered servos?
>
> Scott
>
>
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>