Re: [CAD_CAM_EDM_DRO] Re: Thanks on Help Threading

Dave (turbulatordude)
Yes I did get some other answers, on some of the other list and off
list. Consensus is that for this job I am going to have to send it out or
purchase a die and die handle at almost 100 bucks US. And yes I am going to
start planning a project to set my lathe up for cnc threading. All of the
post have been of great help and gives me an idea of what I need.

Thanks Again

Victor

----- Original Message -----
From: "turbulatordude" <dave_mucha@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Wednesday, June 01, 2005 9:00 AM
Subject: [CAD_CAM_EDM_DRO] Re: Thanks on Help Threading


> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "Victor A. Estes"
> <emc3zach@h...> wrote:
>> Andy Wander, Justin Hirsch, Russ Waters, Juan Gelt, W Thomas and
> Sean from RS Machine, thanks for all of your input. I am going to
> have to purchase the proper die and die handle (a 2" incher) for this
> project and then work on getting my lathe outfitted with the proper
> encoders and rpm readouts and such to be able to single point thread
> in the future. I know it can be done, just have to put all of the
> pieces together. Thanks again for all of your help
>>
>> Victor
>>
>> [Non-text portions of this message have been removed]
>
> Hi Victor,
>
> Seems that either you got responses from other lists, or a lot of
> people responded off-list.
>
> In thinking more about the project, it does appear that you would have
> to have a spindle postion device, an encoder of some sort.
>
> The 11/32 ( 0.6875) is really large for the lathe to be able to cut
> under power execpt for a single point type cutter.
>
> I am glad you did get an answer. (curious what it was) but may I
> suggest you considder what it would take and start planning ?
>
> The encoder for the spindle can be really simple so it is not a very
> complicated project.
>
> I am not sure if EMC does lathe threading, but I would expect it does.
>
> Dave
>
>
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
> OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>