RE: [CAD_CAM_EDM_DRO] Help Needed, Ballscrews

Oh, and here's the page with a link at the bottom to the Bridgeport kits:

http://www.hiwin.com/ballframe.html

Carlos Guillermo
VERVE Engineering & Design

> -----Original Message-----
> From: wanliker@... [mailto:wanliker@...]
> Sent: Friday, June 23, 2000 6:25 PM
> To: CAD_CAM_EDM_DRO@egroups.com
> Cc: modeleng-list@...
> Subject: [CAD_CAM_EDM_DRO] Help Needed, Ballscrews
>
>
> <<You could do some enquiries for me, as I have got no-where on the net.
> I am looking for Ball leadscrews for my miller. It is a Bridgeport
> look-alike. The X axis needs a 3/4" to 1" x 32" Ball-screw, plus
> flanged Ball-nut 2/10" lead. The Y axis is 15" long. I just require
> the threaded part as I'll make up my own ends. I would prefer the
> diameter nearer 3/4" than 1" as the ball-nut is larger than the acme
> nuts on the machine and it may be difficult to get them in. >>
>
> I just got the following note from a friend, can anyone on the
> list make a
> recommendation for a source of the pieces he needs. Also an URL would be
> greatly appreciated if possible.
> Thanks,
> bill