Re: [CAD_CAM_EDM_DRO] Extreme CNC

----- Original Message -----
From: "danmauch" <dmauch@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Tuesday, September 20, 2005 1:25 PM
Subject: [CAD_CAM_EDM_DRO] Extreme CNC


> A customer of mine, (Chuck McGee charlesfmcghee@...
> http://www15.brinkster.com/candgresearch/ ), asked me to check out
> his 6 axis stepper control box. Talk about extreme CNC!. If you
> check out his web site you will see why he needed 6 axis. He did an
> oustanding job of laying out the 6 G201's mounted on two sets of my
> G201 heatsinks (XYZABC), three receptacles for spindle, flood and
> mist motors, 2 Sound Logic ver 1.6 breakout boards, a relay board,
> front panel XYZABC power switches, relay board power switch, XYZ
> stepper motors output enable switc, ABC output enable switch, ABC
> ouput current setting switches selectable for various currents
> stpper motors, and last but not least two remote teperature gauges
> that monitors the XYZ and the ABC G201 dual fan cooled
> heatsink.Additionally, He used ampernol connectors on the back panel
> for reliable connection of the stepper motors to the drivers.
> While Chuck is a machinist by trade, he has vast knowlege and I was
> surprised at what a great job he did of wiring the beast. The only
> problems I found during construction were that the 470uf caps on
> each drivers and the power supply bleed resistor was missingfrom
> the 36V25A power supply I provided. During checkout I ran into a
> problem with the Ver 1.6 Sound Logic boards. JCullins was really
> helpful and after a few emails determined that R11 a 10K resistor
> may need to be changed to 120K. I changed them out and then using
> Mach2 and the Tigerdirect PCI 2 parallel port cards succeffully
> tested all the features of his control box.
> If interested I can email you pictures off line.
> Dan Mauch
> Camtronics Inc
> www.seanet.com/~dmauch
> www.camtronics-cnc.com
> low cost stepper/servo motors
> Gecko control box cases
> Gecko kits and assembled units
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>