Re: [CAD_CAM_EDM_DRO] preping angle iron

How about a belt or palm sander, a metal yard stick (or a straight
edge), and a fat Magic Marker, or, preferably, some sort of colorant
that doesn't dry quickly.
Sand, mark, scrape, sand high spots. Repeat ad infinitum.

Regards,
JJ

On 20-Oct-2005, at 21:43, turbulatordude wrote:

> Hi all,
>
> I'm looking at mounting the gear rack on some angle iron or on the web
> of a channel.
>
> The surface is very rough and I am wonding if I should d any work on
> it, or just bolt up to to it.
>
> Ditto for the linear rails.
>
> I know there is a trick on dies to use paper to get a better seating.
>
> I have angled washers for the web of the channel, and I don't have a
> machine that could cut a flat on it over the 8 foot lenght.
>
> Dave
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach
> it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be
> a sister site to the CCED group, as many of the same members are
> there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
> THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>

---
Help everyone. If you can't do that, then at least be nice.