Re: [CAD_CAM_EDM_DRO] Digital Camera batteries

Hello Ian

Well If you check the mains adapter voltage, and it is 6.5, go lead acid, as
long as you don't mind looking like a commando, and its cheap.

Best Wishes
Peter Smith

----- Original Message -----
From: Ian Wright <Ian@...>
To: <CAD_CAM_EDM_DRO@egroups.com>
Sent: 26 June 2000 12:08
Subject: [CAD_CAM_EDM_DRO] Digital Camera batteries


> Hi,
>
> I'm a little confused - I use a Casio QV-5000 SX which eats batteries
like
> they're going out of fashion and I'd love to change to a rechargeable type
> but the instruction book suggests that rechargeables won't work -
presumably
> because they only give 1.2 volts rather than 1.5 per cell. There is also a
> sticker on the camera which says ' weak batteries generate heat'. I don't
> use the camera much out of doors and usually use a regulated mains supply
> indoors but it would be nice to be able to take it out without having to
> spend a fortune on Duracell Ultras to be able to do so. Is it likely that
my
> camera will work OK on NiMh batteries or would it be too much of a gamble
to
> risk the expense?? Any opinions? Thanks,
>
> Ian
>
> --
> Ian W. Wright
> Sheffield UK
>
>
>
> ------------------------------------------------------------------------
> Get Your FREE Online Credit Report!
> http://click.egroups.com/1/5783/4/_/423600/_/962017261/
> ------------------------------------------------------------------------
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@egroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@egroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@egroups.com
> List owner: CAD_CAM_EDM_DRO-owner@egroups.com, wanliker@...
> Moderator: jmelson@... [Moderator]
> URL to this page: http://www.egroups.com/group/CAD_CAM_EDM_DRO
> FAQ: http://www.ktmarketing.com/faq.html
> bill,
> List Manager
>
>