Re: [CAD_CAM_EDM_DRO] Cameras

Hello Jim

I am very pleased with the Phillips ESP60 that I got, It came with various
computer adapters, mains power supply remote control, television leads,
computer software, it has facilities to compensate for various types of
lighting, LCD, 24, 48, or 96 pics on a 4meg card, it takes very good phot's
inside or outdoors, I got it from a local computer shop for £148.00, which I
thought was a bargain, the only problems I have with it, are the batterys,
and it could do with a bit of zoom from time to time.

Best Wishes
Peter Smith

----- Original Message -----
From: Alison & Jim Gregg <gregg@...>
To: <CAD_CAM_EDM_DRO@egroups.com>
Sent: 26 June 2000 13:41
Subject: Re: [CAD_CAM_EDM_DRO] Cameras


> Hi all.
>
> I tried a Mavica (SD89 I think),and was not impressed. Resolution is poor
> for the price of the camera -you pay Nikon prices and get Instamatic
> definition!. I also found the view finder almost unusable - on a bright
> day you cannot see the image in the thing. Also I found the delay
betweem
> pressing the release and taking the picture irritating and the "sticky"
> image on the view screen not helpful.
>
> Jim Gregg
>
> At 02:01 PM 6/25/00 -0400, you wrote:
> >For what it's worth, I bought a Sony FD91 and am quite satisfied with
> >battery life. The floppies only hold 12 shots at high resolution, but
> >floppies are cheap. I also find that I rarely take more than five or six
> >pictures at a time anyway. The JPEG files are compact and ready to use.
> >
> >The Lithium ion battery is good for about three to five floppies.
> >
> >Doug
> >
> >
> >
> >------------------------------------------------------------------------
> >Was the salesman clueless? Productopia has the answers.
> >http://click.egroups.com/1/4633/4/_/423600/_/961955728/
> >------------------------------------------------------------------------
> >
> >Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
> discussion of shop built systems, for CAD, CAM, EDM, and DRO.
> >
> >Addresses:
> >Post message: CAD_CAM_EDM_DRO@egroups.com
> >Subscribe: CAD_CAM_EDM_DRO-subscribe@egroups.com
> >Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@egroups.com
> >List owner: CAD_CAM_EDM_DRO-owner@egroups.com, wanliker@...
> >Moderator: jmelson@... [Moderator]
> >URL to this page: http://www.egroups.com/group/CAD_CAM_EDM_DRO
> >FAQ: http://www.ktmarketing.com/faq.html
> >bill,
> >List Manager
> >
>
>
> ------------------------------------------------------------------------
> Get a NextCard Visa, in 30 seconds!
> 1. Fill in the brief application
> 2. Receive approval decision within 30 seconds
> 3. Get rates as low as 2.9% Intro or 9.9% Fixed APR
> http://click.egroups.com/1/5197/4/_/423600/_/962023523/
> ------------------------------------------------------------------------
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@egroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@egroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@egroups.com
> List owner: CAD_CAM_EDM_DRO-owner@egroups.com, wanliker@...
> Moderator: jmelson@... [Moderator]
> URL to this page: http://www.egroups.com/group/CAD_CAM_EDM_DRO
> FAQ: http://www.ktmarketing.com/faq.html
> bill,
> List Manager
>
>