Re: [CAD_CAM_EDM_DRO] Re:Free Cad
Posted by
Alan Marconett KM6VV
on 2000-06-27 12:31:12 UTC
Dan,
turbo-cad 2D v.6 is just 2D. Try intelli-cad (free), or BobCad (can
generate g-code). You will want to export .DXF files out of
intelli-cad, then convert them to g-code. Remember, unless you just
need to do engraving, you'll have to create "tool paths", and output
them! Plenty more programs are out there, check CAD/CAM/EDM/DRO
resource list, or Sherline list! Impellers! Wow! now that's gonna take
4-axis! That's something I want to see done, at least once! Next
birthday for a rotary table?
http://www.cadopia.com/ Intelli-cad
http://www.bobcadcam.com/ BobCad
Good luck, and stay tuned (connected?), you're bound to learn from this
group!
Alan
(Sherline/(old sears), BobCad? MAXNC drive, Sherline CNC Retrofit)
djr@... wrote:
turbo-cad 2D v.6 is just 2D. Try intelli-cad (free), or BobCad (can
generate g-code). You will want to export .DXF files out of
intelli-cad, then convert them to g-code. Remember, unless you just
need to do engraving, you'll have to create "tool paths", and output
them! Plenty more programs are out there, check CAD/CAM/EDM/DRO
resource list, or Sherline list! Impellers! Wow! now that's gonna take
4-axis! That's something I want to see done, at least once! Next
birthday for a rotary table?
http://www.cadopia.com/ Intelli-cad
http://www.bobcadcam.com/ BobCad
Good luck, and stay tuned (connected?), you're bound to learn from this
group!
Alan
(Sherline/(old sears), BobCad? MAXNC drive, Sherline CNC Retrofit)
djr@... wrote:
>
> I am new to all of this... just bought a sherline mill and I am
> looking into CNC conversion kits. Is turbo-cad 2 just a 2D tool or
> can you use it to design advanced 3D parts such as an impeller and
> then eventually import it to the CNC driver program?
>
> Thanks
> - Dan
>
> --- In CAD_CAM_EDM_DRO@egroups.com, "Vance Buhler" <vbuhler@v...>
> wrote:
> > Turbo-Cad 2 is fairly simple and free. It's been around for a long
> time and
> > so is pretty bug free which Intellicad certainly wasn't a month ago
> when I
> > tried it...Vance Buhler
>
> ------------------------------------------------------------------------
> Accurate impartial advice on everything from laptops to table saws.
> http://click.egroups.com/1/4634/4/_/423600/_/962070917/
> ------------------------------------------------------------------------
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@egroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@egroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@egroups.com
> List owner: CAD_CAM_EDM_DRO-owner@egroups.com, wanliker@...
> Moderator: jmelson@... [Moderator]
> URL to this page: http://www.egroups.com/group/CAD_CAM_EDM_DRO
> FAQ: http://www.ktmarketing.com/faq.html
> bill,
> List Manager
Discussion Thread
wanliker@a...
2000-06-02 09:04:07 UTC
Re: [CAD_CAM_EDM_DRO] Re:Free Cad
Mike Rainone
2000-06-27 09:18:10 UTC
Re: [CAD_CAM_EDM_DRO] Re:Free Cad
Vance Buhler
2000-06-27 10:11:54 UTC
Re: [CAD_CAM_EDM_DRO] Re:Free Cad
Alan Marconett KM6VV
2000-06-27 12:31:12 UTC
Re: [CAD_CAM_EDM_DRO] Re:Free Cad
Bob Campbell
2000-06-27 12:41:04 UTC
Re: [CAD_CAM_EDM_DRO] Re:Free Cad
wanliker@a...
2000-06-27 17:09:38 UTC
Re: [CAD_CAM_EDM_DRO] Re:Free Cad