Re: [CAD_CAM_EDM_DRO] Re: Re: Re: Electronic Lead Screw & Power Cross Feed | Poor Man''s CNC ?
Posted by
Chris Brick
on 2005-12-08 08:11:30 UTC
Ron,
position into mach3? Is the encoder position updated in mach three
during every cycle or is your board calculating some position
information and doing a comparison to mach's position information?
I've got a project coming up that could really use some position
feedback. I'll be using mach3, geckos, and servos.
Thanks,
Chris
> Don't have an explanation of how it can do this in regardAny chance you can give an explanation of how the encoder board injects
> to speed but, it does it. When first started using encoder counts to
> monitor position, the concern was timing constraints. Now they aren't
> given much attention after three machines have exceeded the 22.5k
> mark without any issues.
position into mach3? Is the encoder position updated in mach three
during every cycle or is your board calculating some position
information and doing a comparison to mach's position information?
I've got a project coming up that could really use some position
feedback. I'll be using mach3, geckos, and servos.
Thanks,
Chris
Discussion Thread
Jon Elson
2005-12-06 18:17:57 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Re: Electronic Lead Screw & Power Cross Feed | Poor Man''s CNC ?
Mariss Freimanis
2005-12-06 20:23:02 UTC
Re: Re: Electronic Lead Screw & Power Cross Feed | Poor Man''s CNC ?
Paul Kelly
2005-12-06 20:28:01 UTC
RE: [CAD_CAM_EDM_DRO] Re: Re: Electronic Lead Screw & Power Cross Feed | Poor Man''s CNC ?
R Rogers
2005-12-06 21:37:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Re: Electronic Lead Screw & Power Cross Feed | Poor Man''s CNC ?
turbulatordude
2005-12-07 09:11:10 UTC
Re: ELS | Poor Man''s CNC ? | G-REX
Henrik Olsson
2005-12-07 09:18:13 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Re: Electronic Lead Screw & Power Cross Feed | Poor Man''s CNC ?
Jon Elson
2005-12-07 09:18:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Re: Electronic Lead Screw & Power Cross Feed | Poor Man''s CNC ?
R Rogers
2005-12-08 06:05:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Re: Electronic Lead Screw & Power Cross Feed | Poor Man''s CNC ?
Chris Brick
2005-12-08 08:11:30 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Re: Electronic Lead Screw & Power Cross Feed | Poor Man''s CNC ?
R Rogers
2005-12-08 09:28:13 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Re: Electronic Lead Screw & Power Cross Feed | Poor Man''s CNC ?
Jon Elson
2005-12-08 09:49:30 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Re: Electronic Lead Screw & Power Cross Feed | Poor Man''s CNC ?
Henrik Olsson
2005-12-08 10:04:01 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Re: Electronic Lead Screw & Power Cross Feed | Poor Man''s CNC ?
R Rogers
2005-12-08 16:50:10 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Re: Electronic Lead Screw & Power Cross Feed | Poor Man''s CNC ?
David A. Frantz
2005-12-08 19:33:43 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Electronic Lead Screw & Power Cross Feed | Poor Man''s CNC ?
Henrik Olsson
2005-12-09 09:21:17 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Re: Electronic Lead Screw & Power Cross Feed | Poor Man''s CNC ?