Re: [CAD_CAM_EDM_DRO] Re: Re: Re: Electronic Lead Screw & Power Cross Feed | Poor Man''s CNC ?
Posted by
R Rogers
on 2005-12-08 09:28:13 UTC
Chris,
The step pulses out are compared to the encoder pulses in, The they are compared within a macro 5 times per second in Mach3. The macro will enact a "feedhold" if the following error is exceeded.
Thanks,
Ron Rogers
Closed loop interfaces for Mach CNC software that monitor machine
position
Alerts and halts machine on position errors, Servo and stepper systems
Provides additional outputs and inputs.
PCI Parallel port cards
DB-25 Cables
Micronor MPG's
Heatsinks for drives
Special Combo pricing
www.rogersmachine.net
Chris Brick <cbrick@...> wrote:
Ron,
position into mach3? Is the encoder position updated in mach three
during every cycle or is your board calculating some position
information and doing a comparison to mach's position information?
I've got a project coming up that could really use some position
feedback. I'll be using mach3, geckos, and servos.
Thanks,
Chris
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Yahoo! Groups Links
[Non-text portions of this message have been removed]
The step pulses out are compared to the encoder pulses in, The they are compared within a macro 5 times per second in Mach3. The macro will enact a "feedhold" if the following error is exceeded.
Thanks,
Ron Rogers
Closed loop interfaces for Mach CNC software that monitor machine
position
Alerts and halts machine on position errors, Servo and stepper systems
Provides additional outputs and inputs.
PCI Parallel port cards
DB-25 Cables
Micronor MPG's
Heatsinks for drives
Special Combo pricing
www.rogersmachine.net
Chris Brick <cbrick@...> wrote:
Ron,
> Don't have an explanation of how it can do this in regardAny chance you can give an explanation of how the encoder board injects
> to speed but, it does it. When first started using encoder counts to
> monitor position, the concern was timing constraints. Now they aren't
> given much attention after three machines have exceeded the 22.5k
> mark without any issues.
position into mach3? Is the encoder position updated in mach three
during every cycle or is your board calculating some position
information and doing a comparison to mach's position information?
I've got a project coming up that could really use some position
feedback. I'll be using mach3, geckos, and servos.
Thanks,
Chris
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Yahoo! Groups Links
[Non-text portions of this message have been removed]
Discussion Thread
Jon Elson
2005-12-06 18:17:57 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Re: Electronic Lead Screw & Power Cross Feed | Poor Man''s CNC ?
Mariss Freimanis
2005-12-06 20:23:02 UTC
Re: Re: Electronic Lead Screw & Power Cross Feed | Poor Man''s CNC ?
Paul Kelly
2005-12-06 20:28:01 UTC
RE: [CAD_CAM_EDM_DRO] Re: Re: Electronic Lead Screw & Power Cross Feed | Poor Man''s CNC ?
R Rogers
2005-12-06 21:37:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Re: Electronic Lead Screw & Power Cross Feed | Poor Man''s CNC ?
turbulatordude
2005-12-07 09:11:10 UTC
Re: ELS | Poor Man''s CNC ? | G-REX
Henrik Olsson
2005-12-07 09:18:13 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Re: Electronic Lead Screw & Power Cross Feed | Poor Man''s CNC ?
Jon Elson
2005-12-07 09:18:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Re: Electronic Lead Screw & Power Cross Feed | Poor Man''s CNC ?
R Rogers
2005-12-08 06:05:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Re: Electronic Lead Screw & Power Cross Feed | Poor Man''s CNC ?
Chris Brick
2005-12-08 08:11:30 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Re: Electronic Lead Screw & Power Cross Feed | Poor Man''s CNC ?
R Rogers
2005-12-08 09:28:13 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Re: Electronic Lead Screw & Power Cross Feed | Poor Man''s CNC ?
Jon Elson
2005-12-08 09:49:30 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Re: Electronic Lead Screw & Power Cross Feed | Poor Man''s CNC ?
Henrik Olsson
2005-12-08 10:04:01 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Re: Electronic Lead Screw & Power Cross Feed | Poor Man''s CNC ?
R Rogers
2005-12-08 16:50:10 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Re: Electronic Lead Screw & Power Cross Feed | Poor Man''s CNC ?
David A. Frantz
2005-12-08 19:33:43 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Electronic Lead Screw & Power Cross Feed | Poor Man''s CNC ?
Henrik Olsson
2005-12-09 09:21:17 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Re: Electronic Lead Screw & Power Cross Feed | Poor Man''s CNC ?