Re: [CAD_CAM_EDM_DRO] Bridgeport serie1 retrofit motor problem

Hi Patrick,

Try running the motors half-winding. You will get more torque at low
speed but you will sacrifice a small amount of top speed. That is how I
ran my mill when I had steppers on it.

Les

odowdpat wrote:

>Hello:
>I have a sound logic board that is conected to Gecko 212s being run
>with Mach2 turning Bridgeport superior stepper motors
>I've managed to get the axies moving. The motors are a little anemic,
>I'm wondering if there's another way to wire the motors or configure
>Mach2 to get more power from the motors. I'm running the superior
>stepper motors at 56 volts in a parallel wiring config. any ideas would
>be great.
>Thanks
>Patrick O'Dowd
>
>