Re: Bridgeport serie1 retrofit motor problem

Ok do you or anyone else know where I can find a drawing that will
show me how to do that change.

--- In CAD_CAM_EDM_DRO@yahoogroups.com, Les Newell <lesnewell@h...>
wrote:

>
> Hi Patrick,
>
> Try running the motors half-winding. You will get more torque at

low

> speed but you will sacrifice a small amount of top speed. That is

how I

> ran my mill when I had steppers on it.
>
> Les
>
> odowdpat wrote:
>
> >Hello:
> >I have a sound logic board that is conected to Gecko 212s being run
> >with Mach2 turning Bridgeport superior stepper motors
> >I've managed to get the axies moving. The motors are a little

anemic,

> >I'm wondering if there's another way to wire the motors or

configure

> >Mach2 to get more power from the motors. I'm running the superior
> >stepper motors at 56 volts in a parallel wiring config. any ideas

would

> >be great.
> >Thanks
> >Patrick O'Dowd
> >
> >
>