CAD CAM EDM DRO - Yahoo Group Archive

Re: VSD QUESTION

Posted by john_glynn57
on 2006-01-15 09:59:52 UTC
THANKS FOR THE ADVICE BOB. THE ROUTER MOTOR THAT I AM USING IS A
MAKITA SINGLE PHASE AC MOTOR WIRED FOR 230V AC. DO YOU THINK THAT I
WOULD GET THE APPROXIMATELY THE CORRECT RESULT IF I USED A STANDARD
230-110 STEPDOWN TRANSFORMER THAT I CAN READILY PICKUP CHEAPLY.

JOHN
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Bob Muse" <mtebob1@s...>
wrote:
>
> Hi John
>
> If your router has brushes, it is most likely a "universal
motor". This
> may be operated on AC or DC. One easy way to control the speed is
just by
> controlling the input voltage with a variac. There may be other
controllers
> designed to do this job also--but the three phase VFD is not a
good choice.
>
> Bob
>
> ----- Original Message -----
> From: "john_glynn57" <john_glynn57@y...>
> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> Sent: Saturday, January 14, 2006 2:54 PM
> Subject: [CAD_CAM_EDM_DRO] VSD QUESTION
>
> > I WANT TO USE A TOSHIBA VSD TO CONTROL THE SPEED ON A SINGLE
PHASE
> > ROUTER MOTOR. THE VSD IS RATED AT 1.5KW BUT HAS A 3 PHASE OUTPUT
AND I
> >
>

Discussion Thread

john_glynn57 2006-01-14 14:56:46 UTC VSD QUESTION Bob Muse 2006-01-14 16:09:46 UTC Re: [CAD_CAM_EDM_DRO] VSD QUESTION Jon Elson 2006-01-14 21:43:32 UTC Re: [CAD_CAM_EDM_DRO] VSD QUESTION Jon Elson 2006-01-14 21:47:55 UTC Re: [CAD_CAM_EDM_DRO] VSD QUESTION john_glynn57 2006-01-15 09:59:52 UTC Re: VSD QUESTION Robert Campbell 2006-01-15 10:13:15 UTC Re: [CAD_CAM_EDM_DRO] Re: VSD QUESTION Bob Muse 2006-01-15 10:29:59 UTC Re: [CAD_CAM_EDM_DRO] Re: VSD QUESTION john_glynn57 2006-01-15 11:07:12 UTC Re: VSD QUESTION john_glynn57 2006-01-15 11:10:33 UTC Re: VSD QUESTION Jon Elson 2006-01-17 20:55:26 UTC Re: [CAD_CAM_EDM_DRO] Re: VSD QUESTION Jon Elson 2006-01-17 22:32:15 UTC Re: [CAD_CAM_EDM_DRO] Re: VSD QUESTION john_glynn57 2006-01-18 13:34:11 UTC Re: VSD QUESTION Babar 2006-01-18 15:56:50 UTC Re: [CAD_CAM_EDM_DRO] To convert Quadrature Encoder signals to Tachogenerator signals Bot Great 2006-01-18 22:42:04 UTC Re: [CAD_CAM_EDM_DRO] To convert Quadrature Encoder signals to Tachogenerator signals Jon Elson 2006-01-19 12:13:39 UTC Re: [CAD_CAM_EDM_DRO] To convert Quadrature Encoder signals to Tachogenerator signals Babar 2006-01-19 21:35:56 UTC Re: [CAD_CAM_EDM_DRO] To convert Quadrature Encoder signals to Tachogenerator signals Jon Elson 2006-01-20 10:42:52 UTC Re: [CAD_CAM_EDM_DRO] To convert Quadrature Encoder signals to Tachogenerator signals Jon Elson 2006-01-20 19:02:40 UTC Re: [CAD_CAM_EDM_DRO] To convert Quadrature Encoder signals to Tachogenerator signals Babar 2006-01-26 21:40:29 UTC Re: [CAD_CAM_EDM_DRO] Another Solution!!!!To convert Quadrature Encoder signals to Tachogenerator signals Babar 2006-01-26 21:40:30 UTC Re: [CAD_CAM_EDM_DRO] Another Solution!!!!To convert Quadrature Encoder signals to Tachogenerator signals Jon Elson 2006-01-27 10:03:16 UTC Re: [CAD_CAM_EDM_DRO] Another Solution!!!!To convert Quadrature Encoder signals to Tachogenerator signals