CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Ballscrew balls ?

Posted by figNoggle
on 2006-04-06 15:05:20 UTC
hi harko-

i measured the balls in the thomson/danaher non-preloaded nut (just happen
to be reballing them) and they're all 0.1245". i ordered a bag of both
1/8" (which are indeed 0.1250" and do flow through the race) and 3.5mm.

the 3.5mm's don't fit through the race (found out the hard way but had to
try it).

interesting, what kind of ballnuts have different sized balls and why?




CNC Plans <http://www.fignoggle.com/plans/cncplans.htm> (DRO too)
HF 8x12 Lathe, Mini-Mill, How-To's and More <http://www.fignoggle.com>
NEW! Sieg X3 and Super X3 Mill Information <http://www.superx3.com>


On Thu, 6 Apr 2006, Harko Schwartz wrote:

> First of all ball screw balls are not of the same size in the ballnut. If
> they were it wouldn't work. The balls are not the only problem the nut and
> screw are also worn. If the hardness hasn't been removed from the screw
> then it is a matter of resizing the balls. I think that every other ball is
> slightly undersized.
>
> Harko
>
>
> On 4/6/06, turbulatordude <dave_mucha@...> wrote:
> >
> > Hi all,
> >
> > Are ball screw balls sold individually ?
> >
> > I want to replace the balls in one I have and am wondering what to get.
> >
> > Any suggestions ?
> >
> > Dave
> >
> >
> >
> >
> >
> >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> > timg@...
> > Moderator: pentam@... indigo_red@... davemucha@...
> > [Moderators]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> > aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> > if you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> > sister site to the CCED group, as many of the same members are there, for OT
> > subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
> > THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >
>
>
> [Non-text portions of this message have been removed]
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
> Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>

Discussion Thread

turbulatordude 2006-04-06 14:28:27 UTC Ballscrew balls ? R Rogers 2006-04-06 14:31:38 UTC Re: [CAD_CAM_EDM_DRO] Ballscrew balls ? figNoggle 2006-04-06 14:33:28 UTC Re: [CAD_CAM_EDM_DRO] Ballscrew balls ? Harko Schwartz 2006-04-06 14:54:56 UTC Re: [CAD_CAM_EDM_DRO] Ballscrew balls ? figNoggle 2006-04-06 15:05:20 UTC Re: [CAD_CAM_EDM_DRO] Ballscrew balls ? rickchownyk2000 2006-04-06 15:36:10 UTC Re: Ballscrew balls ? turbulatordude 2006-04-06 19:43:48 UTC Re: Ballscrew balls ? - RockOmatic spindle ballendo 2006-04-07 07:35:06 UTC Re: Ballscrew balls ? ballendo 2006-04-07 07:35:47 UTC Re: Ballscrew balls ? ballendo 2006-04-07 07:36:13 UTC Re: Ballscrew balls ? figNoggle 2006-04-07 08:53:55 UTC Re: [CAD_CAM_EDM_DRO] Re: Ballscrew balls ? Harko Schwartz 2006-04-07 14:34:46 UTC Re: [CAD_CAM_EDM_DRO] Ballscrew balls ? kiwiavi 2006-04-08 21:29:39 UTC Re: Ballscrew balls ? figNoggle 2006-04-24 16:29:35 UTC Re: [CAD_CAM_EDM_DRO] Re: Ballscrew balls ?