Re: [CAD_CAM_EDM_DRO] Servo Heating

R Rogers wrote:

>The "gain" on the G320 is probably set too high. If this is a Bridgeport type machine there shouldnt be that much load on the Y servo, other than inertia. The only axis I've noticed this being a problem is Z driving the 1000lb+ knee and peck drilling, and that is after like 4 solid hours of it.
>
> One of the things that will help with motors running cooler is a 100volt 1000mf cap right at the drive on the motor leads.
>
>

NO NO NO! On the POWER leads. If you put the cap on the MOTOR
leads, you will have an explosion! I'm not kidding! It will also fry the
Gecko drive.

Jon