Re: laser edge finder
Posted by
Graham Stabler
on 2006-05-12 15:17:19 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, wanliker@... wrote:
I was meaning the wobblers with the two balls that can find an edge
and run true until pushed off axis. I never look for scribed lines
because I can use a DRO from a wobbled edge generally.
Graham
>size) is centered over a scribed crossed lines.
> If the hole the wobbler is engaged in, is hand punched, I think it >
>will have less accuracy than the spot, (that I find acceptable in
I was meaning the wobblers with the two balls that can find an edge
and run true until pushed off axis. I never look for scribed lines
because I can use a DRO from a wobbled edge generally.
Graham
Discussion Thread
Alan Marconett
2006-05-10 11:31:58 UTC
laser edge finder
David Speck
2006-05-11 15:58:16 UTC
Re: [CAD_CAM_EDM_DRO] laser edge finder
Graham Stabler
2006-05-11 17:24:53 UTC
Re: laser edge finder
ballendo
2006-05-12 00:01:03 UTC
Re: laser edge finder
Graham Stabler
2006-05-12 03:00:24 UTC
Re: laser edge finder
ballendo
2006-05-12 03:45:23 UTC
Re: laser edge finder
wanliker@a...
2006-05-12 08:38:43 UTC
laser edge finder
Graham Stabler
2006-05-12 15:17:19 UTC
Re: laser edge finder