Re: Adding USB

The demand build cycles are a side effect of their policy to never
obsolete anything -- it's just impossible for them to stock
everything. Mid-sized builds really need to go through a decent
distributor.

On 5/18/06, ballendo <ballendo@...> wrote:
> Hello,
>
> That link works a bit better without the comma, like this:
>
> http://www.maxim-ic.com/
>
> FWIW, maxim is really great at sending out samples. Th eproblem is
> that they're often not so good at supplying a smaller operation with
> those sampled chips... But if you buy LOTS, they do well again.
>
> So a hobbyist can get his onesie -twosie needs met for free, and a
> large mfr is well taken care of. But a mid to low level mfr. will
> often have problems getting stock IME.
>
> A strange business model...
>
> YMMV,
>
> Ballendo
>
>
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "Dennis Schmitz"
> <denschmitz@...> wrote:
> >
> > Thumbs up to designing with maxim chips, btw. Their corp policy is
> > that they never obsolete products, although it might take a while
> to
> > fill orders for really old parts.
> >
> > On 5/17/06, Bill Vance <ccq@...> wrote:
> > > For those of you wanting to add USB to your projects, you can
> get a free
> > > interface design guide from:
> > >
> > > http://www,maxim-ic.com/
> > >
> > > Using their chips, of course.
> > >
> > > Bill
> >
>
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
> you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for OT
> subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>