Re: excel to gcode
Posted by
Fred Smith
on 2006-05-30 12:10:18 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "afogassa" <afogassa@...>
wrote:
from an .STL file. It will automatically calculate the tool passes
using X-Z motion and indexing in A as often as you specify. Model
your bracelet in 3D, save in .STL and then DeskCNC will make the
toolpath directly.
Fred Smith - IMService
http://www.cadcamcadcam.com/hobby
wrote:
>getting
> Thank's Tom and others, Tom got it, I'm using ATAN2(X,Y) and
> points from Z and Y axis.and
> What I'm trying to cut looks like a bracelete, it's kind of oval
> the side walls are not parallel.the
> Can not just rotate A axis as the X and Z axis needs to move at
> same time.If you are using DeskCNC, you can directly create rotary axis code
> I'm using Deskcnc. A axis goes from 0 to 360 plus or minus and
> adding past the 360.
from an .STL file. It will automatically calculate the tool passes
using X-Z motion and indexing in A as often as you specify. Model
your bracelet in 3D, save in .STL and then DeskCNC will make the
toolpath directly.
Fred Smith - IMService
http://www.cadcamcadcam.com/hobby
Discussion Thread
afogassa
2006-05-30 10:28:23 UTC
excel to gcode
Fred Smith
2006-05-30 12:10:18 UTC
Re: excel to gcode
afogassa
2006-05-30 12:32:17 UTC
Re: excel to gcode
Fred Smith
2006-05-30 13:14:11 UTC
Re: excel to gcode