Re: [CAD_CAM_EDM_DRO] G-Rex 3,900 IPM video

----- Original Message -----
From: "Larry Olson" <larry@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Sunday, June 04, 2006 5:40 PM
Subject: RE: [CAD_CAM_EDM_DRO] G-Rex 3,900 IPM video


> cool
>
> -----Original Message-----
> From: Mariss Freimanis [mailto:mariss92705@...]
> Sent: Sunday, June 04, 2006 2:35 PM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: [CAD_CAM_EDM_DRO] G-Rex 3,900 IPM video
>
> OK, taped it, converted to DivX, posted it. Please go to:
>
> http://www.geckodrive.com/product.cfm?pid=19
>
> Then pick 3900IPM.avi. Please download and save; view it from your
> hard drive instead of selecting "open". This will save on bandwidth
> and not irritate our webmaster.:-)
>
> Video: 16 seconds, 1.234MB, 720 X 480 format, encoded using DivX 6.0,
> no audio; had to remove it because I swore when I nearly got nicked
> by the axis.
>
> The average velocity is 51.4"/sec if accel/decel is included. The
> velocity 65.535"/sec after accel, before decel. The motor is an MCG
> IH230014 run in parallel at 3A/phase, 24VDC supply, PID closed-loop
> on the G100 driving a stock-standard G201.
>
> I'll leave the video up one week, then I'll take it down. Enjoy.
>
> Mariss
>
>
>
>
>
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there,
> for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.394 / Virus Database: 268.8.1/355 - Release Date: 6/2/06
>
>