Re: [CAD_CAM_EDM_DRO] Takisawa Astroturn DTX-1 Retro Fit
Posted by
Harko Schwartz
on 2006-06-10 19:51:05 UTC
The Dc spindle drive is driven with a binary code not analog and the servo
takes analog but you will probably have to change the feedback from resolver
to encoder. I recommend using the Machinemate CNC which can handle the
whole machine without any problem. THe cnc with 48 inputs and 34 outputs
and 4 axes of control.
Harko
takes analog but you will probably have to change the feedback from resolver
to encoder. I recommend using the Machinemate CNC which can handle the
whole machine without any problem. THe cnc with 48 inputs and 34 outputs
and 4 axes of control.
Harko
On 6/9/06, garageboy21 <garageboy21@...> wrote:
>
> Hi all,
>
> I have the oppertunity to get a Takisawa DTX-1 for next to nothing and
> was hoping that someone out there had any experience with retrofitting
> the control on one. It has a Fanuc 5T now, and I am wondering about
> the DC spindle and whether or not the servo motors are brushless.
>
> Basicly, would you recommend trying to get this lathe going?
>
> Thank you!
> Dustin
>
>
>
[Non-text portions of this message have been removed]
Discussion Thread
garageboy21
2006-06-09 19:28:41 UTC
Takisawa Astroturn DTX-1 Retro Fit
Harko Schwartz
2006-06-10 19:51:05 UTC
Re: [CAD_CAM_EDM_DRO] Takisawa Astroturn DTX-1 Retro Fit
Yesamazza@a...
2006-06-10 23:20:32 UTC
Re: [CAD_CAM_EDM_DRO] Takisawa Astroturn DTX-1 Retro Fit
Lee
2006-09-05 17:31:22 UTC
Re: Takisawa Astroturn DTX-1 Retro Fit
archie road
2006-09-08 07:38:07 UTC
Re: [CAD_CAM_EDM_DRO] Re: Takisawa Astroturn DTX-1 Retro Fit