CAD CAM EDM DRO - Yahoo Group Archive

Re: HP printer encoders

on 2006-07-26 06:12:58 UTC
I've used the recycled encoder strips and detectors from HP printers, one is currently on my mill/drill for Z axis indication using a Red Lion Gemini 1000 as the quadrature readout.

Depending on the printer, the encoders may have different resolution. The first one I salvaged had less than 300 lines per inch. The second, from an HP 1120C printer was much better, but still less than 500 lines per inch. The Red Lion counter has programmable scale factor, so I'm able to get a readout to 0.001, but there are some missing numbers on that last digit. For what I'm doing, that is mostly good enough.

The pinouts are pretty much obvious after some study. I don't have them handy, but have them somewhere.

Earle Rich
Mont Vernon, NH
________________________________________________________________________
Check out AOL.com today. Breaking news, video search, pictures, email and IM. All on demand. Always Free.


[Non-text portions of this message have been removed]

Discussion Thread

BRIAN FOLEY 2006-07-25 09:10:39 UTC Re: [CAD_CAM_EDM_DRO] Graham Stabler 2006-07-25 10:30:39 UTC Re: HP printer encoders Alan Marconett 2006-07-25 12:30:33 UTC RE: [CAD_CAM_EDM_DRO] Re: HP printer encoders Graham Stabler 2006-07-25 15:51:39 UTC Re: HP printer encoders Alan Marconett 2006-07-25 17:25:24 UTC Re: [CAD_CAM_EDM_DRO] Re: HP printer encoders erich10983@a... 2006-07-26 06:12:58 UTC Re: HP printer encoders Alan Rothenbush 2006-07-27 00:14:12 UTC Re: [CAD_CAM_EDM_DRO] Re: HP printer encoders