Re: [CAD_CAM_EDM_DRO] Thk slides

dont be affraid to work em back and forth. and same when you put grease to
them work it in good..cul brian f.

----- Original Message -----
From: "Bill Davis" <wdavis@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Thursday, August 24, 2006 8:05 PM
Subject: Re: [CAD_CAM_EDM_DRO] Thk slides


> Brian, I think you're right, I need to stick the bearing in cleaning
solution and let it soak a while.
> thanks
> bill
> ----- Original Message -----
> From: BRIAN FOLEY
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Sent: Thursday, August 24, 2006 5:28 PM
> Subject: Re: [CAD_CAM_EDM_DRO] Thk slides
>
>
> Hi, first try is to clean the bearing and see if you can get some dirt
out
> of the bearing. it might also be grease hardened up in the ball races.
time
> and mineral spirits usually will help loosen the grease. cul brian f.
> ----- Original Message -----
> From: "wdavis364" <wdavis@...>
> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> Sent: Thursday, August 24, 2006 5:10 PM
> Subject: [CAD_CAM_EDM_DRO] Thk slides
>
> > I bought a pair of THK SR15 slides off a Ebay and one of the blocks is
> > slides is moving rough as though it is missing some of the ball
> > bearings.
> > Can I reload the bearings here? I've seen ball bearing on sale for
> > reloading. Is there info on how to do this? If this is doable, where
> > can I look for this information and where to buy these ball bearing?
> > thanks
> > bill
> >
> >
> >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> > Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
if
> you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there,
for OT
> subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >
> > --
> > No virus found in this incoming message.
> > Checked by AVG Free Edition.
> > Version: 7.1.405 / Virus Database: 268.11.5/426 - Release Date:
8/23/06
> >
> >
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.405 / Virus Database: 268.11.5/426 - Release Date: 8/23/06
>
>