Re: [CAD_CAM_EDM_DRO] Re: Thk slides
Posted by
Bill Davis
on 2006-08-25 07:56:47 UTC
thanks tom, I'll try it. It seems every time I work with it it seems to get a little better. What ever it is that on the bearings is got to be tough stuff.
thanks
bill
thanks
bill
----- Original Message -----
From: caudlet
To: CAD_CAM_EDM_DRO@yahoogroups.com
Sent: Friday, August 25, 2006 7:14 AM
Subject: [CAD_CAM_EDM_DRO] Re: Thk slides
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Bill Davis" <wdavis@...>
wrote:
>
> Brian, I think you're right, I need to stick the bearing in cleaning
solution and let it soak a while.
> thanks
> bill
Bill: Run the bearings back and forth while "painting" on Mineral
Spirits with a brush. While soaking them will help, it won't wash the
junk out of the bearings. Once they start to free up you can switch
to WD40 (more as a cleaner than a lubricant). Another more aggressive
approach that I sometimes have to use on my slides is brake cleaner
from the auto store. Works wonders on waxy or junked up surfaces but
will attack some plastics so be careful.
[Non-text portions of this message have been removed]
Discussion Thread
wdavis364
2006-08-24 14:16:50 UTC
Thk slides
David Speck
2006-08-24 14:45:15 UTC
Re: [CAD_CAM_EDM_DRO] Thk slides
Bill Davis
2006-08-24 15:33:24 UTC
Re: [CAD_CAM_EDM_DRO] Thk slides
BRIAN FOLEY
2006-08-24 15:37:15 UTC
Re: [CAD_CAM_EDM_DRO] Thk slides
David Speck
2006-08-24 15:55:04 UTC
Re: [CAD_CAM_EDM_DRO] Thk slides
turbulatordude
2006-08-24 16:12:50 UTC
Re: Thk slides
Bill Davis
2006-08-24 17:11:09 UTC
Re: [CAD_CAM_EDM_DRO] Thk slides
Bill Davis
2006-08-24 17:12:44 UTC
Re: [CAD_CAM_EDM_DRO] Thk slides
BRIAN FOLEY
2006-08-24 19:20:02 UTC
Re: [CAD_CAM_EDM_DRO] Thk slides
Paul Kelly
2006-08-25 03:54:02 UTC
DB25 cutouts
caudlet
2006-08-25 05:20:54 UTC
Re: Thk slides
Stephen Wille Padnos
2006-08-25 06:30:27 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thk slides
Dennis Schmitz
2006-08-25 07:41:48 UTC
Re: Thk slides
Bill Davis
2006-08-25 07:56:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thk slides